The Starlink Mini changed the accessory math. It is smaller, it draws less, and its cable and bracket interface are its own — so a mount or cable bought for the Standard will not necessarily fit. This guide covers the accessories that actually fit the Mini, written for resellers and installers rather than first-time buyers.
What is different about the Mini
The Mini integrates the router, so there is no separate rectangular router puck to house. Power comes over a thinner DC run, and the mounting points are closer together than on the Standard. The practical consequence: clamp range and bracket geometry are the two numbers that decide whether a generic "Starlink mount" fits, and most generic mounts are sized for the larger kit. Always check the clamp range in millimetres against the Mini's footprint before listing or installing.
Mounts for the Mini
For vehicles and RVs, a non-marking magnetic or suction base that holds through motorway vibration is the safe default; the Mini is light enough that a quality magnet mount is stable without drilling. For permanent roofs, a fixed aluminium bracket with a documented clamp range is worth the fixings. For poles and walls, a universal pipe adapter covering 40 to 114 mm covers most mast and wall-rail installations. Salt-spray tested aluminium matters for coastal and marine use.
Power and DC cables
The Mini runs happily from 12V or 24V vehicle systems through a regulated car adapter, and from a DC cable assembly in 3 m, 5 m and 10 m lengths. Specify IP67 on the cable and oxygen-free copper on the conductors to keep voltage drop inside specification over the longer runs. For fixed sites, a 150W PoE injector or step-up converter rated -20C to +60C keeps the run clean.
Cables, waterproofing and protection
Use shielded RJ45 where the run meets the site network, and a sealed waterproof cable for any exposed outdoor section. A hard carry case with custom foam inserts protects the terminal and its brackets in transit, and a dust-and-UV cover matters if the unit is stored between deployments. For the Mini's smaller profile, check the case internal dimensions rather than assuming a Standard case fits.
Compatibility traps
Kit revisions change small physical details — a collar dimension, a bracket interface — while keeping the same marketing name. A mount that fitted the first Mini revision can sit loose on a later one. Keep a maintained model record per product so a listing or an install does not quietly become wrong, and state the revision coverage on anything customer-facing.
Specifying a Mini range
Send us the Mini revisions you support, the deployment type (vehicle, roof, pole, off-grid) and the run lengths. You get a feasibility check and indicative pricing within one working day, with the MOQ tier named — catalogue items from 50 pieces, branded runs from 500.